Thermal Grizzly Lapping Tool for Intel 13. Generation

Thermal Grizzly Lapping Tool for Intel 13. Generation

Name: Thermal Grizzly Lapping Tool for Intel 13. Generation
Brand: Thermal Grizzly
SKU: 4260711990717
Price: 159.00 SEK
Availability: InStock

Tillagd - 2024-07-11

Uppdaterad - 2025-01-11

EAN: 4260711990717

Tillgänglighet:

I lager

Thermal Grizzly -The lapping tool for Intel's 13th Gen processors allows the heat spreader to be safely lapped. The CPU is simply mounted on the lapping tool using the enclosed screws. The tolerances of the lapping tool allow the heat spreader to be ground down by 0.2 millimetres. The 13th Gen Lapping Tool is compatible with Intel 12th Generation Core CPUs. Sandpaper in grit sizes 400, 1200 and 2,500 is included. * Simplifies CPU sanding * For Intel Core 13th/14th Gen (Compatible with 12th Gen) * CNC-milled acrylic glass * Complete set with sandpaper * Single use recommended On the lapping tool, there are ridges on the acrylic glass around the CPU. These ridges are 0.2 millimetres high. When the ridges are completely removed, stop sanding. Processors of the 12th and 13th generation are compatible with both the 12th, 13th and 14th Gen Contact Frame as long as they are not ground down more than 0.2 millimetres. For the largest possible contact area between the IHS and the base plate of the CPU cooler, the latter should also be ground. The lapping tool for Intel's 13th Gen CPUs comes with a total of three sheets of sandpaper. The enclosed sandpaper has grits of 400, 1200 and 2,500 (one sheet each). The lapping tool for Intel's 13th Gen CPUs is intended for single use, but can also be used several times. When using multiple times, be especially careful not to sand too much material off the IHS. 1x lapping tool 4x screw 4x PU washer 1x hexagon socket spanner 2,5mm 1x 400 grit sandpaper 1x Sandpaper 1.200 grit 1x Sandpaper 2.500 grit

159.00 kr

Webhallen

Alla priser: (5 butiker)

Priser

159 kr

Komplett

159 kr

Webhallen

219 kr

Proshop

60 kr dyrare

225 kr

Amazon

66 kr dyrare

Kylning Thermal Grizzly Kylning

Liknande produkter

Thermal Grizzly Conductonaut Liquid metal - 1 Gram

Thermal Grizzly

Ej kompatibel med kylflänsar i aluminium! Tänkt på att vara extremt försiktig vid användning av denna kylpasta, använder du för mycket eller spiller på moderkortet så kan du kortsluta moderkortet. Conductonaut liquid metal thermal compound is designed for applications that require very high efficiency. Conductonaut is recommended for experienced users who are looking for a top performance product with best heat dissipation where temperature ranges are above 8 °C. * Ultra high thermal conductivity * Increased indium content * Easy application with synthetic needle Thermal Grizzly Conductonaut is a liquid metal thermal compound based on a eutectic alloy. Our special mixture of metals like tin, gallium and indium, Conductonaut excels with a very high thermal conductivity. We recommend to apply Conductonaut on nickel plated surfaces since this will provide the best long term stability in performance. Note: Conductonaut thermal grease must not be used with aluminum heatsinks! Note: Conductonaut is a liquid metal compound and can leave visual residues. For best long term performance results we recommend to use coolers with nickel plated Surface.

149.00 kr

Thermal Grizzly Conductonaut Extreme - 1 Gram

Thermal Grizzly

The Conductonaut Extreme liquid metal thermal compound is the further development of Conductonaut and was developed for applications with maximum power density. As a gallium-based liquid metal, Conductonaut Extreme is a metallic alloy that is liquid at room temperature, allowing for the minimum possible layer thickness. * Optimised thermal conductivity compared to conventional liquid metal * Increased material compatibility * Optimum application due to metal needle * Attention: Electrically conductive! * Do not bring into contact with aluminium! Conductonaut Extreme thermal paste is technically not a thermal paste, as a paste consists of liquid and solid particles. The disadvantage of a paste is the solid particles. The surfaces of the base plate of the CPU cooler and the CPU heat spreader are uneven on a microscopic level. A traditional thermal paste fills these irregularities unevenly. Since the solid particles are larger than the gaps caused by the unevenness, more distance must be filled between the cooler and the heat spreader. A heat-conducting medium in the form of liquid metal does not have this problem because it does not contain any "large" particles. As a result, the surfaces of the CPU cooler and heat spreader are closer together. At the same time, liquid metal has a constant heat transfer, while the larger solid particles in pastes usually conduct heat better than the paste parts. Liquid metal is preferable to thermal paste, especially in high energy applications. Conductonaut Extreme is manufactured to the highest quality standards at our production site in Germany. Our expertly trained staff continuously monitor the entire production chain. From testing the purity of the raw material, to the production of the liquid metal and filling, to packaging, production is subject to multiple quality controls. Conductonaut Extreme is recommended as a high-end product for experienced users who are looking for a solution with best heat dissipation in the temperature range above 8°C. We recommend applying Conductonaut Extreme on nickel-plated copper as this offers the best long-term stability. Scope of delivery 1x Syringe with liquid metal 1x Metal needle for application 1x Plastic needle for absorbing 2x Lint-free industrial cotton swabs 2x Cleaning pad Note: Conductonaut Extreme thermal paste must not be used with aluminium coolers! Note: Conductonaut Extreme is a metal alloy and may leave optical residues. For best long-term performance, we recommend heatsinks with nickel-plated copper bases.

189.00 kr