Thermal Grizzly Ryzen 7000 Delid-Die-Mate - Modding
Tillgänglighet:
I lager
Inga betyg
688.00 kr
Proshop
Priser
Liknande produkter
Thermal Grizzly Lapping Tool for Intel 13. Generat - Modding
Thermal Grizzly
The lapping tool for Intel's 13th Gen processors allows the heat spreader to be safely lapped. The CPU is simply mounted on the lapping tool using the enclosed screws. The tolerances of the lapping tool allow the heat spreader to be ground down by 0.2 millimetres. The 13th Gen Lapping Tool is compatible with Intel 12th Generation Core CPUs. Sandpaper in grit sizes 400, 1200 and 2,500 is included.VOIDS WARRANTYWhen lapping your CPU you void your warranty - using this lapping tool at your own risk
219.00 kr
Thermal Grizzly Lapping Tool for Ryzen 7000 - Modding
Thermal Grizzly
The AM5 Lapping-Tool was developed for grinding the heat spreaders of the AM5 processor series from AMD. The tolerances of the AM5 Lapping-Tool allow a gradual grinding of the heat spreader by 0.4 millimetres, up to a total height of 1.6 millimetres. When using the normal AMD mounting frame (SAM), a maximum sanding of 1.0 mm is provided until the middle steps are reached. A further 0.6 mm is only possible if the CPU is mounted e.g. with a suitable AM5 Contact Frame.VOIDS WARRANTYWhen lapping your CPU you void your warranty - using this lapping tool at your own risk
100.00 kr
204.00 kr
Thermal Grizzly Delid-Die-Mate For Intel 12th & 13th Gen - Modding
Thermal Grizzly
The Delid-Die-Mate Intel 13th Gen is a tool for removing the heat spreader ("delidden") on Intel processors for socket LGA1700. By removing the heat spreader, the CPUs can be cooled via "direct die", for example. With the so-called "direct die", the CPU cooler is mounted directly on the processor chip. By omitting the heat spreader in the cooling circuit, a significantly optimised heat transfer from the die to the CPU cooler is possible.VOIDS WARRANTYWhen delidding your CPU you void your warranty - using this Delid-Die-Mate tool at your own risk
749.00 kr
Thermal Grizzly Conductonaut Extreme - 5 Gram
Thermal Grizzly
The Conductonaut Extreme liquid metal thermal compound is the further development of Conductonaut and was developed for applications with maximum power density. As a gallium-based liquid metal, Conductonaut Extreme is a metallic alloy that is liquid at room temperature, allowing for the minimum possible layer thickness. * Optimised thermal conductivity compared to conventional liquid metal * Increased material compatibility * Optimum application due to metal needle * Attention: Electrically conductive! * Do not bring into contact with aluminium! Conductonaut Extreme thermal paste is technically not a thermal paste, as a paste consists of liquid and solid particles. The disadvantage of a paste is the solid particles. The surfaces of the base plate of the CPU cooler and the CPU heat spreader are uneven on a microscopic level. A traditional thermal paste fills these irregularities unevenly. Since the solid particles are larger than the gaps caused by the unevenness, more distance must be filled between the cooler and the heat spreader. A heat-conducting medium in the form of liquid metal does not have this problem because it does not contain any "large" particles. As a result, the surfaces of the CPU cooler and heat spreader are closer together. At the same time, liquid metal has a constant heat transfer, while the larger solid particles in pastes usually conduct heat better than the paste parts. Liquid metal is preferable to thermal paste, especially in high energy applications. Conductonaut Extreme is manufactured to the highest quality standards at our production site in Germany. Our expertly trained staff continuously monitor the entire production chain. From testing the purity of the raw material, to the production of the liquid metal and filling, to packaging, production is subject to multiple quality controls. Conductonaut Extreme is recommended as a high-end product for experienced users who are looking for a solution with best heat dissipation in the temperature range above 8°C. We recommend applying Conductonaut Extreme on nickel-plated copper as this offers the best long-term stability. Scope of delivery 1x Syringe with liquid metal 1x Metal needle for application 1x Plastic needle for absorbing 2x Lint-free industrial cotton swabs 2x Cleaning pad Note: Conductonaut Extreme thermal paste must not be used with aluminium coolers! Note: Conductonaut Extreme is a metal alloy and may leave optical residues. For best long-term performance, we recommend heatsinks with nickel-plated copper bases.
666.00 kr
Thermal Grizzly Lapping Tool for Intel 13. Generation
Thermal Grizzly
The lapping tool for Intel's 13th Gen processors allows the heat spreader to be safely lapped. The CPU is simply mounted on the lapping tool using the enclosed screws. The tolerances of the lapping tool allow the heat spreader to be ground down by 0.2 millimetres. The 13th Gen Lapping Tool is compatible with Intel 12th Generation Core CPUs. Sandpaper in grit sizes 400, 1200 and 2,500 is included. * Simplifies CPU sanding * For Intel Core 13th/14th Gen (Compatible with 12th Gen) * CNC-milled acrylic glass * Complete set with sandpaper * Single use recommended On the lapping tool, there are ridges on the acrylic glass around the CPU. These ridges are 0.2 millimetres high. When the ridges are completely removed, stop sanding. Processors of the 12th and 13th generation are compatible with both the 12th, 13th and 14th Gen Contact Frame as long as they are not ground down more than 0.2 millimetres. For the largest possible contact area between the IHS and the base plate of the CPU cooler, the latter should also be ground. The lapping tool for Intel's 13th Gen CPUs comes with a total of three sheets of sandpaper. The enclosed sandpaper has grits of 400, 1200 and 2,500 (one sheet each). The lapping tool for Intel's 13th Gen CPUs is intended for single use, but can also be used several times. When using multiple times, be especially careful not to sand too much material off the IHS. 1x lapping tool 4x screw 4x PU washer 1x hexagon socket spanner 2,5mm 1x 400 grit sandpaper 1x Sandpaper 1.200 grit 1x Sandpaper 2.500 grit
149.00 kr
159.00 kr
Thermal Grizzly Lapping Tool for Ryzen 7000
Thermal Grizzly
The Ryzen 7000 Lapping Tool was developed for grinding the heat spreaders of the AM5 processor series from AMD. The tolerances of the Ryzen 7000 Lapping Tool allow gradual grinding of the heat spreader by 0.4 millimetres, up to a total height of 1.6 millimetres. When using the normal AMD mounting frame (SAM), a maximum sanding of 1.0 mm is provided until the middle steps are reached. A further 0.6 mm is only possible if the CPU is mounted e.g. with a suitable AM5 Contact Frame (product to follow shortly). The steps of the AM5 Lapping Tool are diamond-milled to achieve a high degree of transparency. This makes it visible during grinding which steps have already been reached and which have not. * Simplifies the grinding of the AM5 CPU * CNC-milled acrylic glass * Complete set with sandpaper * One-time use Why sanding / lapping? When grinding, or lapping, the heat spreader, usually only the top side of the heat spreader is levelled, as this is usually somewhat curved due to the production process. Lapping improves the contact of the base plate of the CPU cooler, especially if the base plate has also been ground. This optimised contact allows the thermal power loss of the CPU to be dissipated better. However, the Ryzen 7000 Lapping Tool enables controlled removal of the heat spreader well above the usual 0.2 millimetres. This should not only increase the contact area of the heat spreader and CPU cooler, but also reduce the path that the waste heat is conducted through the AM5 heat spreader. In order to be able to continue using older CPU coolers for the AM4 socket with the AM5 socket, the AM5 heat spreader had to be designed significantly thicker than would have been necessary. Among other things, this leads to high CPU temperatures during operation. For the largest possible contact surface between the IHS and the base plate of the CPU cooler, the latter should also be ground. 1x AM5 lapping tool 4x screw 4x washer 1x angle spanner 1x 400 grit sandpaper 1x Sandpaper 1.200 grit 1x Sandpaper 2.500 grit
149.00 kr